ACL-8112PG - Enhanced Multi-Function Data Acquisition Card

Enhanced Multi-Function Data Acquisition Cards

Introduction

The ACL-8112PG is a high speed analog and digital I/O card for IBM PC/AC and compatible computers. It is the new generation of the industrial standard ACL-812PG and PCL-812PG from ADLink and Advantech.

Advanced Features

12-bit analog input resolution
16-bit or 12-bit analog input resolution
Up to 100 KHz A/D sampling rates
16 single-ended input channels
Bipolar input signals
Programmable gain selection
On-chip sample & hold
Two 12-bit monolithic multiplying analog output channels
16 digital output channels
16 digital input channels
3 independent programmable 16-bit down counter
Three A/D trigger modes: software trigger, programmable pacer trigger, & external pulse trigger
Integral DC-to-DC converter for stable analog power source
37-pin D-type connector
Compact size: half-size PCB

Software Support

There are several software options to help you get your applications running quickly and esily.

Linking with data acquisition software packages:
- DASYLab 3.0
- LabVIEW, LabWindows
- Visual Lab M
Custom programming:
For the customer who is writing their own programs, the PCI-7200 is supported by a comprehensive set of drivers and programming tools. This software support is available in multiple platforms.
- MS-DOS C/C++ program library
- ACLS-DLL2: Dynamic linking library for Windows 3.11, Win-95 and Win-NT
- ACLS-DASK: Advanced data acquisition software kit for Windows 3.11, Win-95 and Win-NT

Specifications

Analog Input (A/D)
Converter	B.B ADS774, successive approximation type
Input Channels	16 single-ended
Resolution	12-bit
Input Range	(software controlled) Bipolar: ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V, ±0.3125V
Conversion Time	10 msec
Overvoltage Protection	Continuous ±30V maximum
Accuracy	Gain=1: 0.01% of FSR ±1 LSB Gain=2,4: 0.02% of FSR ±1 LSB Gain=8, 16: 0.04% of FSR ±1 LSB
Input Impedance	10MW
Trigger Mode	Software, pacer, and external trigger
Data Transfer	Program control, interrupt, DMA
Data Throughput	100KHz (maximum), single CH by DMA transfer
Analog Output (D/A)
Output Channel	2 double-buffered analog outputs
Resolution	12-bit
Output Range	Internal reference: (unipolar)0~5V or 0~10V External reference: (unipolar) max. +10V or -10V
Converter	B.B 7541 or equivalent, monolithic multiplying
Settling Time	30 msec
Linearity	±1/2 bit LSB
Output Driving	±5mA max
Digital I/O (DIO)
Channel	16 TTL compatible inputs and outputs
Input Voltage	Low: Min. 0V; Max. 0.8V High: Min. +2.0V
Input Load	Low: +0.5V @ 0.2mA max. High: +2.7V @ +20mA max.
Output Voltage	Low: Min. 0V; Max. 0.4V High: Min. +2.4V
Driving Capacity	Low: Max. +0.5V at 8.0mA (sink) High: Min. 2.7V at 0.4mA (source)
Programmable Counter
Device	8254
A/D Pacer	32-bit timer (two 16-bit counter cascaded together) with a 2MHz time base
Counter	One 16-bit counter with a 2MHz time base
Pacer Output	0.00046 Hz ~ 0.5MHz
General Specifications
I/O Base Address	16 consecutive address locations
Connector	37-pin D-type connector
IRQ Level	3, 5, 6, 7, 9, 11, 12, 15
DMA Level	CH1 and CH3
Operating Temperature	0°C ~ 60°C
Storage Temperature	-20°C ~ 80°C
Humidity	5 ~ 95%, non-condensing
Power Consumption	+5V @ 360mA +12V @ 300mA
Dimensions	Compact size, only 162(L) x 124(H) mm

Cat No.	Description	Price
ACL-8112PG	100K A/D Multiple Function Card	$299.00

View Owner's Manual

Go To Data Acquisition Index

Enhanced Multi-Function Data Acquisition Cards

To Order,

Please Call Toll Free at (800) 811-5208

Inside the Phoenix-Metro Area Please Call (602) 464-2485