Introduction
The ACLD-9185 provides 16 electro-mechanical SPDT relays which can be used by any ACL board with DIO channels on 20-pin flat ribbon connector. Each relay has an LED to indicate it's ON/OFF status.
Each relay consumes about 33mA when energized. With all relays on the board active, it takes about 0.53A from the computer's 12V supply.
The ACLD-9185 has a jumper switch allowing the user to connect an external +12V power source if desired.
Features
| Relay type: | SPDT (form C) |
| Contact rating: | 120V AC/0.5A resistive 30V DC/1A resistive |
| Breakdown voltage: | 1000V DC/peak AC min. |
| Relay ON time: | 3msec typical |
| Relay OFF time: | 3msec typical |
| Control logic: | Input TTL high (+5) relay on |
| Insulation resistance: | 100M ohms |
| Life expectancy: | >5 million operations at full load |
| Signal connector: | 20-pin flat ribbon cable connector |
| Output connectors: | Industrial type terminal block |
| Dimensions: | 8" x 4.5" (205 x 114mm) |
| Operating temp: | 0°~60°C |
| Storage temp: | -20°~80°C |
| Humidity: | 5~95%, non-condensing |
| Cat No. | Description | Price |
| ACL-9185 | 16 CH Relay Output Board | $139.00 |
©1995 Circuit Specialists, Inc.