@Copyright 1995

All Rights Reserved.

Manual edition 10, Novermber 1995

 

The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

 

Trademarks

ACLD-9188 is registered trademarks of ADLink Techology Inc., Advantech and PCLD-880 is a trademark of Advantech Co., Ltd. IBM PC is a registered trademark of International Business Machines Corporation. Intel is a registered trademark of Intel Corporation. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.


Contents




How to Use This Guide
1. Introduction
1.1 Features
 1.2 What You Have
 1.3 Applications
 1.4 Pin Assignment
 Appendix A. ACLD-9188's Layout
 Appendix B. ACLD-9188's Circuit Diagram
 Product Warranty/Service

How to Use This Guide

This manual is designed to help you use the ACLD-9188. The manual describes how to modify various resisters or capacitors on the ACLD-9188 card to meet your requirements. It is divided into five chapters:

· Chapter 1, "Introduction," gives an overview of the product 9273 features and applications.

· Chapter A, "ACLD-9188's Layout," shows the layout of ACLD-9188.

· Appendix B, " ACLD-9188's Circuit Diagram," shows the circuit diagram of ACLD-9188.


1. Introduction

The ACLD-9188 is a universal screw terminal panel which provides convenient connection points for 20-pin flat ribbon cable or shielded cable with 37-pin D-type connector. This panel is designed for field signal wiring in industrial applications.

The ACLD-9188 is designed specifically for accommodate the requirements of analog input boards for passive signal conditioning components. For example, you can easily construct a low-pass filter, attenuator or current-to-voltage converter by adding resistors and capacitors onto the reserved circuit pads.


1.1 Features

The ACLD-9188 industrial terminal panel provides the following advanced features:


1.2 What You Have

In addition to this User's Manual, the package includes the following items:

If any of these items is missing or damaged, contact the dealer from whom you purchased the product. Save the shipping materials and carton in case you want to ship or store the product in the future.


1.3 Applications :

The ACLD-9188 is suitable for specifically passive signal conditioning components. The following circuit is an example of add signal conditioning circuits for screw connector A1 and A2.


1.4 Pin Assignment

A1

CN1-1

-

 CN5-1

A2

CN1-2

-

 CN5-20

A3

CN1-3

-

 CN5-2

A4

CN1-4

-

 CN5-21

A5

CN1-5

-

 CN5-3

A6

CN1-6

-

 CN5-22

A7

CN1-7

-

 CN5-4

A8

CN1-8

-

 CN5-23

A9

CN1-9

-

 CN5-5

A10

CN1-10

-

 CN5-24

A11

CN1-11

-

 CN5-6

A12

CN1-12

-

 CN5-25

A13

CN1-13

-

 CN5-7

A14

CN1-14

-

 CN5-26

A15

CN1-15

-

 CN5-8

A16

CN1-16

-

 CN5-27

A17

CN1-17

-

 CN5-9

A18

CN1-18

-

 CN5-28

A19

CN1-19

-

 CN5-10

A20

CN1-20

-

 CN5-29

B1

-

CN2-1

 CN5-11

B2

-

CN2-2

 CN5-30

B3

-

CN2-3

 CN5-12

B4

-

CN2-4

 CN5-31

B5

-

CN2-5

 CN5-13

B6

-

CN2-6

 CN5-32

B7

-

CN2-7

 CN5-14

B8

-

CN2-8

 CN5-33

B9

-

CN2-9

 CN5-15

B10

-

CN2-10

 CN5-34

B11

-

CN2-11

 CN5-16

B12

-

CN2-12

 CN5-35

B13

-

CN2-13

 CN5-17

B14

-

CN2-14

 CN5-36

B15

-

CN2-15

 CN5-18

B16

-

CN2-16

 CN5-37

B17

-

CN2-17

 CN5-19

B18

-

CN2-18

 -

B19

-

CN2-19

 -

B20

-

CN2-20

 -


Appendix A. ACLD-9188's Layout


Appendix B. ACLD-9188's Circuit Diagram







 

Product Warranty/Service

Seller warrants that equipment furnished will be free form defects in material and workmanship for a period of one year from the confirmed date of purchase of the original buyer and that upon written notice of any such defect, Seller will, at its option, repair or replace the defective item under the terms of this warranty, subject to the provisions and specific exclusions listed herein.

This warranty shall not apply to equipment that has been previously repaired or altered outside our plant in any way as to, in the judgment of the manufacturer, affect its reliability. Nor will it apply if the equipment has been used in a manner exceeding its specifications or if the serial number has been removed.

Seller does not assume any liability for consequential damages as a result from our products uses, and in any event our liability shall not exceed the original selling price of the equipment.

The equipment warranty shall constitute the sole and exclusive remedy of any Buyer of Seller 9273 equipment and the sole and exclusive liability of the Seller, its successors or assigns, in connection with equipment purchased and in lieu of all other warranties expressed implied or statutory, including, but not limited to, any implied warranty of merchant ability or fitness and all other obligations or liabilities of seller, its successors or assigns.

The equipment must be returned postage-prepaid. Package it securely and insure it. You will be charged for parts and labor if you lack proof of date of purchase, or if the warranty period is expired.



©1995 Circuit Specialists, Inc.