XY-9, XY-18, XY-30 - XY Dual Axis Positioning Tables

XY-9, XY-18, XY-30
XY Dual Axis Positioning Tables

Lightweight, Easy-to-Use, Accurate

Introduction

As with our 'X' series positioning tables, the 'XY' series can be used for a variety of automation applications. Two degrees of freedom allow more complex tasks to be performed such as working with a rack of test tubes or drilling small holes in a circuit board. The aluminum frame makes the table strong and lightweight while the solid steel shafts and bronze bearings provide accuracy and long life with a minimum of flexure. The 'XY' series tables can be controlled using size 23 motors such as our MD-2, MD-2a or MD-2b. The MD-2 software will automatically compensate for any belt stretch resulting in increased accuracy. A home switch attached to each axis provides feedback to the controller and gives the software a reference point for all positioning commands. Use the 'XY' series tables with our Z-2 table for 3-axis positioning tasks or with our steel stands for gantry (upside down) operation.

Package Includes

Linear Positioning Table
All Necessary Hardware
Home Switches
Tools for Setup
Documentation

Possible Tools

Test Probe
Miniature Drill
Pneumatic Gripper
Adhesive Dispenser
Sensor
Engraver
Camera

Specifications

When used with the MD-2 stepper motor system and a 2 pound payload:
Accuracy:	+/- .010" per foot
Resolution:	.005" per .9° step
Repeatability:	.005"
Maximum X Speed:	2" per sec
Maximum Y Speed:	4" per sec
NOTE: Payloads up to 15 pounds can be used with decreased speed and accuracy.

Pricing

Three Sizes to Choose From

Cat No.	Product Description	Price
XY-9	Dual Axis Positioning Table, 9" of Travel on Each Axis	$ 749.95
XY-18	Dual Axis Positioning Table, 18" of Travel on Each Axis	849.95
XY-30	Dual Axis Positioning Table, 30" of Travel on Each Axis	1499.95