Fans




Ball Bearing 12V DC Fans




These High Quality Fans feature Ball Bearings and Brushless DC Motors. All of them are designed to meet UL, CSA & VDE Standards. Design these fans into power supplies, computers or other equipment requiring additional air flows for heat removal. These fans are regular Circuit Specialists stock items they are not surplus.

INDUSTRY BEST PRICING!


Specifications
Cat No. Dimensions (mm) Rated Voltage (v) Start Voltage (v) Input Current (a) Air Flow (cfm) Static Pressure
(Inch-H20)
Speed (rpm) Noise Level (dB) Weight (g)
CSD 4010-12 40x40x10mm 12 7 0.06 5.1 0.19 5,500 26 20
CSD 6025-12 60x60x25mm 12 5 0.13 13.7 0.165 4,500 28 65
CSD 8025-12 80x80x25mm 12 5 0.16 37.8 0.177 3,000 31 80
CSD 9225-12 92x92x25mm 12 5 0.32 42 0.18 2,800 37 95
CSD 1225-12 120x120x25mm 12 5 0.35 62 0.180 2,500 42 135


Price Each
Cat No. 1 10 25 100
CSD 4010-12 $9.88 $6.38 $5.48 $4.87
CSD 6025-12 $9.38 $5.91 $5.41 $4.71
CSD 8025-12 $8.88 $5.85 $5.19 $4.49
CSD 9225-12 $8.95 $6.14 $5.29 $4.59
CSD 1225-12 $11.45 $8.96 $7.82 $6.85




Ball Bearing AC Fans


Specifications
Cat No. Dimensions (mm) Nominal Voltage (v) Frequency (Hz) Speed (rpm) Input Power (w) Air Flow (m3/min) Static Pressure (mm) Noise Level (dB A)
CSA8038AC 80x80x38.5 110/120 50/60 2300/2600 9/7 0.63/0.72 3.5/4.5 31/34
CSA1225AC 120x120x25.5 110/120 50/60 2000/2300 12/10 1.56/1.70 4.6/4.8 23/36




Size: 80 x 80 x 38.5mm (3.15 x 3.15 x 1.5")
Weight: 370±10gm (0.82lb.)
Frame/Housing: Aluminum
Impeller: Glass reinforced thermoplastic UL94V-O
Bearing Type: Ball Bearing
Dielectric Strength: 1 minute at 1,500VAC/50-60Hz
Operating Temp: -20°~+85°C
Life Expectancy: 50,000 Hrs (at 25°C, 65%RH)
Motor Protection: Impedance Protected
Safety Approvals: Meets UL, CSA, VDE Standards


Price Each
Cat No. 1 10 25 100
CSA8038AC $15.26 $12.92 $10.98 $ 9.73




Size: 120 x 120 x 25.5mm (4.71 x 4.71 x 1.00")
Weight: 390±10gm (0.86lb.)
Frame/Housing: Aluminum
Impeller: Glass reinforced thermoplastic UL94V-O
Bearing Type: Ball Bearing
Dielectric Strength: 1 minute at 1,500VAC/50-60Hz
Operating Temp: -20°~+85°C
Life Expectancy: 50,000 Hrs (at 25°C, 65%RH)
Motor Protection: Impedance protected
Safety Approvals: Meets UL, CSA, VDE Standards


Price Each
Cat No. 1 10 25 100
CSA1225AC $15.28 $12.94 $11.01 $ 9.88




CPU Cooling Fan




Cool your 486 or Pentium CPU's with one of these CPU Cooling Fans.

Now available at new lower prices!


Price Each
Cat No. Product Description 1 5 10
CC-M3 Cooling Fan for 486 CPU's $7.50 $6.00 $5.00
PENTIUM FAN Cooling Fan for Pentium CPU's
(Will not fit Pentium 60 or 66MHz)
$9.50 $8.00 $7.00




PC Ventilator

LIFESAVING IMPLANT TECHNOLOGY INCREASES PC LIFESPAN!






Heat! Your PC's worst enemy is the heat build up associated with extended use. The PC Ventilator provides an effective and easy to install solution by venting inside air directly to the rear of your PC. Other internal fan cards simply "stir" the air but the PC Ventilator's unique design channels air directly through its own exhaust tubes and ports it out of the PC through one of the expansion slot positions.

This is a powerful, effective solution to PC heat build up. Ideal for add-on to your existing system since it is easy to install and takes up only one expansion slot postition.

Features





Parts Listing
  1. 4cm fan
  2. Fan base
  3. Extending air tube
  4. Metal bracket
  5. Main air tube
  6. Regulator stand
  7. 4 pin connector


Installation Procedure
  1. Insert the regulator stand into a slot
  2. Put the main unit onto the regulator and screw the metal bracket to the rear chassis
  3. Adjust the desire tube length then move the fan facing the highest heat emitting element and link the power connector






CAT NO DESCRIPTION PRICE
PC-VENTILATOR PC Ventilator with Dual Exhaustion Fan $16.95




Plastic Fan Filter Assemblies




These fan filter packages consist of a guard, foam filter media and media retainer for tubeaxial fans. The retainer is easy to install without removing the fan or guard while the foam filter is also simple to clean and change. Use these kits to protect your equipment from airborn contamination and reduce external fan noise.

Price Each
Cat No. Product Description 1 10 25 50
GRM 60 Plastic Fan Filter Kit for 60mm Fans $1.76 $1.42 $1.20 $ .98
GRM 80 Plastic Fan Filter Kit for 80mm Fans $2.20 $1.75 $1.48 $1.28
GRM 92 Plastic Fan Filter Kit for 92mm Fans $2.60 $2.05 $1.74 $1.40
GRM 120 Plastic Fan Filter Kit for 120mm Fans $2.92 $2.19 $1.84 $1.56




Metal Fan Filter Assemblies




For use with tubeaxial fans. These wire formed fan guards provide extra safety.

Price Each
Cat No. Product Description 1 10 25 50
FG40-2 Wire Formed Fan Guard for 40mm Fans $1.72 $1.29 $1.09 $ .86
FG60-4 Wire Formed Fan Guard for 60mm Fans $1.92 $1.44 $1.19 $ .96
FG80-5 Wire Formed Fan Guard for 80mm Fans $2.00 $1.50 $1.24 $ .99
FG92-5 Wire Formed Fan Guard for 92mm Fans $2.28 $1.71 $1.39 $1.14
FG120-15A Wire Formed Fan Guard for 120mm Fans $2.52 $1.89 $1.57 $1.26




Fan Power Cord


2' Length, SPT-1, AWG18 x 2C, UL/CSA

Price Each
Cat No. Product Description 1 10 25 50
C180 Power Cord for AC Fans $1.28 $1.14 $ .94 $ .78




To Order,

Please Call Toll Free at (800) 811-5208

Inside the Phoenix-Metro Area Please Call (602) 464-2485



©1995 Circuit Specialists, Inc.