Modular RF Decoder
Motherboard
This motherboard is the base in building a high quality RF receiver to fit
your requirements. On board DIP switches allow for easy coding. Designed to
be compatible with the TX-01 and a corresponding transmitter
daughterboard, the RE-01 with a RE- daughterboard installed, will provide quality and
reliability for your project needs.
Specifications
The RE-01 is supplied with two decoding IC's, install the one which best suits your requirements.
Use the HT-12D to decode the first 8 bits of
the address code while the last 4 bits are interpreted
as data and appear at the header on pins 3 through 6.
Use the HT-12F to receive a transmitted 12 bit address code which allows for 4096 different
code combinations installed on the RE-01 decoder motherboard.
Designed for receiving 4 bit data codes, not
for rapid data transmission (RDT).
| Electrical |
| Operating Voltage: |
12VDC |
| Physical |
| Length: |
3-3/16" (81.00mm) |
| Width: |
2-3/8" (61.00mm) |
| Height: |
1/2" (12.70mm) |
| Environmental |
| Operating Temp: |
0°C to 40°C |
| Storage Temp: |
-20°C to 80° |
| Cat No. |
Product Description |
Price |
| RE-01 |
Decoder Motherboard |
$14.95 |
Daughterboard
This Super-Regenerative RF receiver module designed for easy interfacing with the
RE-01 motherboard, just a few solder connections is all it takes to mate the two together.
Specifications
- 150 Ft. Range, Line of Sight (Range may vary in different environments.)
- Operates within FCC Regulations (Not FCC Approved)
| Electrical |
| Operating Voltage: |
5VDC |
| Operating Current: |
< or = 1.6mA |
| w/RE-01: |
< or = 15mA |
| Frequency: |
310MHz ± 250KHz |
| Physical |
| Length: |
2-3/8" (61.00mm) |
| Width: |
1-3/16" (31.00mm) |
| Height: |
11/16" (17.00mm) |
| Environmental |
| Operating Temp: |
0°C to 40°C |
| Storage Temp: |
-20°C to 80° |
| Cat No. |
Product Description |
Price |
| RE-66 |
Decoder Daughterboard |
$6.95 |
Daughterboard
This Super Regen-erative RF receiver module designed
for easy interfacing with the RE-01 motherboard, just a few
solder connections is all it takes to mate the two together.
Specifications
- 150 Ft. Range, Line of Sight (Range may vary in different environments.)
- Operates within FCC Regulations (Not FCC Approved)
| Electrical |
| Operating Voltage: |
5VDC |
| Operating Current: |
< or = 1.6mA |
| w/RE-01: |
< or = 15mA |
| Frequency: |
300MHz ± 100KHz |
| Physical |
| Length: |
2-3/8" (61.00mm) |
| Width: |
1-3/16" (31.00mm) |
| Height: |
11/16" (17.00mm) |
| Environmental |
| Operating Temp: |
0°C to 40°C |
| Storage Temp: |
-20°C to 80° |
| Cat No. |
Product Description |
Price |
| RE-99v3.0 |
Decoder Daughterboard |
$6.95 |
Please Call Toll Free at (800) 811-5208
Inside the Phoenix-Metro Area Please Call (602) 464-2485
©1995 Circuit Specialists, Inc.