Modular RF Encoder

Motherboard

This motherboard is the base in building a high quality RF trans-mitter to fit your requirements. On board DIP switches allow for easy coding. Combine the TX-01 with an appropriate daughterboard to complete a semi-custom transmitter unit for your project needs.

Specifications
The TX-01 uses the HT12E to sequentially encode and transmit a 12 bit address code which allows for 4096 different code combinations when the HT-12F IC is installed on the RE-01 decoder motherboard. The TX-01 can also be used to transmit an 8 bit address code with a 4 bit data code when the HT-12D is installed on the RE-01 decoder motherboard. (Both HT-12D & HT-12F IC's are included with the RE-01 motherboard.)
4 bit data codes, not for rapid data transmission (RDT).

Electrical
Operating Voltage:	12VDC
Physical
Length:	2-11/16" (68.00mm)
Width:	1-3/4" (45.00mm)
Height:	7/16" (12.00mm)
Environmental
Operating Temp:	0°C to 40°C
Storage Temp:	-20°C to 80°

Cat No.	Product Description	Price
TX-01	Encoder Motherboard	$9.95

Daughterboard

This Super-Regenerative RF module utilizes SAW technology for non-drifting signal transmissions. The TX-66 is designed for easy interfacing with the TX-01 motherboard, just a few solder connections is all it takes to mate the two together.

Specifications

150 Ft. Range, Line of Sight (Range may vary in different environments.)
Operates within FCC Regulations (Not FCC Approved)

Electrical
Operating Voltage:	5VDC
Operating Current:	< or = 1.6mA
w/TX-01:	< or = 4.6mA
Frequency:	310MHz ± 250KHz
Physical
Length:	3/4" (20.00mm)
Width:	1-3/4" (45.00mm)
Height:	11/16" (18.03mm)
Environmental
Operating Temp:	0°C to 40°C
Storage Temp:	-20°C to 80°

Cat No.	Product Description	Price
TX-66	Encoder Daughterboard	$10.95

Daughterboard

This Super-Regenerative (LC) RF module is designed for easy interfacing with the TX-01 motherboard, just a few solder connections is all it takes to mate the two together.

Specifications

150 Ft. Range, Line of Sight (Range may vary in different environments.)
Operates within FCC Regulations (Not FCC Approved)

Electrical
Operating Voltage:	5VDC
Operating Current:	< or = 1.6mA
w/TX-01:	< or = 4.6mA
Frequency:	300MHz ± 100KHz
Physical
Length:	1-13/16" (45.00mm)
Width:	13/16" (20.00mm)
Height:	1/2" (13.00mm)
Environmental
Operating Temp:	0°C to 40°C
Storage Temp:	-20°C to 80°

Cat No.	Product Description	Price
TX-99v3.0	Encoder Daughterboard	$5.95

TX-99K Key Chain Transmitter

The TX-99K is a condensed version of the TX-99 & TX-01 combined without the DIP switches. Signal coding is achieved by cutting of appropriate PCB traces. Can only utilize 2 of the 4 data lines. (Not FCC approved. 12V battery, "23A" optional.)

Applications:

Garage Door Opener
Wireless Security Systems
Door Lock Actuators
Remote Equipment Controller
Remote ON/OFF Control

Cat No.	Product Description	Price
TX-99K	Key Chain Transmitter	$15.95
23A	12V Battery for TX-99K	$ 1.20

Modular RF Encoder

To Order,

Please Call Toll Free at (800) 811-5208

Inside the Phoenix-Metro Area Please Call (602) 464-2485