Solder Equipment & Supplies




Chip Quik Patented SMD Removal Kit




Finally, a breakthrough in removing Surface Mount Devices (SMDs) from printed circuit boards.

Servicing SMDs will no longer be a problem, as it has been in the past. Chip QuikTM will revolutionize surface mounted technology.

Present methods are expensive, unreliable and damaging to printed circuit boards and components due to excessive heat and mechanical strain.

Chip QuickTM announces the availability of its new removal kit. The kit contains a special removal alloy, a braid to be used for clean-up and a special liquid flux to be used with both alloy and braid. Contents of kit will remove 8-10 SMDs. Complete instructions are included.

The removal process is very simple. The only tools required are a soldering iron and a dental pick.

The technician applies special liquid flux to all leads of SMD to be removed. Then, with soldering iron, melts special alloy uniformly on all pins. (Temperature need not be much more than 300°F.) The iron is used to keep the alloy in a molten state long enough to react with the solder. Now the SMD can easily be lifted from the board with a puller or dental pick.

To clean up remains on PC board, use a Q-tip dipped in flux and a soldering iron to push large globs to unused section of board, let solidify and remove. Then use braid and flux for remaining solder alloy on contacts. Clean with solvent. You are now ready to install the new chip.

The removed SMD can be cleaned up with a heat gun and a natural bristle brush. If SMD is good, reuse it.

Price Each
Cat No. Product Description 1 5
CHIPQUIK SMD Removal Kit $24.95 $21.79




SOLDER: ATTENTION SOLDER BUYERS!




Here is quality solder manufactured to the highest standards at a tremendous price. Circuit Specialists is a direct importer of this product and our large purchasing power enables us to offer this product at great savings. Manufactured with pure tin from Malaysia, and lead ingots from Australia. This solder has obtained prestigious Japanese Industry Standard (JIS) certification. It surpasses all levels defined in JIS and MIL standards for solderability, non-corrosiveness and conductivity. Melting points are 362°-365°F for the 63/37 and 365°-383°F for the 60/40.

Price Each
Cat No. Product Description 1 10 25
RH60-1 1lb Spool .031" Diam 60/40 (Sn%/Pb%) $6.90 $5.96 $5.30
RH63-1 1lb Spool .031" Diam 63/37 (Sn%/Pb%) $6.95 $6.10 $5.41
RH60-4 4.4lb Spool .031" Diam 60/40 (Sn%/Pb%) $24.00 $21.90 $17.92
RH60-TUBE 1oz Tube .031" Diam 60/40 (Sn%/Pb%) $ .99 $ .89 $ .79




Low Cost Soldering Irons


AS LOW AS $1.99 each


25 Watt pencil soldering iron. Lightweight, bakelite contruction.

Price Each
Cat No. Product Description 1 10 100
WT25 25W Soldering Iron $2.99 $2.29 $1.99
H1 Replacement Tip $ .42




3-Wire Soldering Iron/40 Watt




Soldering iron with rubber sleeve for comfortable grip. Implements 3 wire grounded power cord.

Price Each
Cat No. Product Description 1 10 100
SH-813A 3-Wire 40W Soldering Iron $4.69 3.89 $3.29
F2 Replacements Tip $ .49




Solder Scooter Electric Desoldering Tool




Compact, comfortably balanced tool plugs into any 115VAC outlet. Ceramic substrate element heats and quickly melts the solder joint. Powerful vacuum pump operates at the touch of a button to suck up solder easily and efficiently. Removeable reservoir makes clean out easy.

Price Each
Cat No. Product Description 1 5
08-355 Electric Desoldering Tool $25.95 $22.49




Desoldering Pumps




These powerful plastic body desoldering pumps are designed for easy one hand operation for fast, efficient desoldering. Double O-ring piston seals for maximum suction.

Price Each
Cat No. Product Description 1 5 10
08-366S Large Desoldering Pump $15.89 $13.49 $11.95
08-366E Regular Desoldering Pump $10.89 $8.59 $7.39
08-366TIP Replacement Tip $1.95 $1.95 $1.95




Soldering Aid Kit




This kit facilitates any soldering during PC board assembly, repair etc. Contains 2 heat sinks, 1 electronic tweezer with self closing blunt tip, brush & scraper, fine point and slotted probes for reaming and holding wires while soldering.

Price Each
Cat No. Product Description 1 10 100
08-361 Solder Aid Kit $4.95 $3.95 $3.29




Ungar Iron




Superior quality UL listed 25 Watt 700°F.

Cat No. Product Description Price
3125 Ungar Iron $15.95




Heat Sink




Absorb heat during soldering/desoldering of heat sensitive parts.

Price Each
Cat No. Product Description 1 10
HT-156 Heatsink $1.99 $1.45




Desoldering Wick




Our new solder wick is 100% oxygen free, oil free and coated with pure water white rosin flux, which will clean the area thoroughly to ensure future solder ability. This fine braid wick is made of the finest raw materials available to allow the best possible desoldering results.

SPECIFICATIONS:

MIL-F-142560d, TYPE R NASA: NHB5300.4, NPC200-4 & SP-5002

AVAILABLE IN 5FT OR 25FT SPOOLS


Price Each
Cat No. Product Description 1 10 25
12-205 #2 Yellow, .060", 5 Ft. $1.74 $1.45 $1.25
12-225 #2 Yellow, .060", 25 Ft. $6.39 $5.84 $5.43
12-305 #3 Green, .085", 5 Ft. $1.74 $1.45 $1.25
12-325 #3 Green, .085", 25 Ft. $6.39 $5.84 $5.43
12-405 #4 Blue, .100", 5 Ft. $1.90 $1.59 $1.36
12-425 #4 Blue, 100", 25 Ft. $7.09 $6.54 $6.08




Helping Hands




Metal bases provide sturdy counterweight to PCB's or other small components. Available with or without magnifier lens.

Price Each
Cat No. Product Description 1 10 100
608-391A With Magnifier Lens $4.95 $3.95 $3.24
608-391B Without Magnifier Lens $4.49 $3.49 $2.89




Electronic Soldering System


AS LOW AS $50.00


Here's the ideal solution when Temperature Control is required. Easy to use slide control allows user to set system from 300°F to 840°F. Voltage to iron from control unit is 24V. Iron heating power is 48W. Replaceable 5.3mm tip is standard. Replacement irons and tips are available.

Price Each
Cat No. Product Description 1 5
SL10 Temperature Controlled Soldering Iron $56.00 $50.00
SL24V Spare 24V Soldering Iron $10.50 $ 7.50




Electronic Soldering System
with LED Display


AS LOW AS $75.00


Deluxe temperature controlled system with LED display for maximum accuracy. Tem-perature is adjustable from 160°-480°C (320°-900°F). Iron heating power is 48 Watts. Runs on 24V from controller unit. Replacement irons and tips are available. Tip size is 5.3mm.

Price Each
Cat No. Product Description 1 5
SL30 Deluxe Soldering System w/LED $86.00 $75.00
SL24V Spare 24V Soldering Iron for SL10 or SL30 $10.50 $ 7.50




Replacement Tips for SL10/SL30




We now offer a variety of replacement tips for the SL10/SL30 soldering stations.

Price Each
Cat No. Product Description 1 5
821 1/32" Pencil Tip $1.39 $1.19
822 1/32" Pencil Tip $1.39 $1.19
823 1/64" Pencil Tip $1.39 $1.19
824 1/16" Chisel Tip $1.49 $1.29
825 1/8" Chisel Tip $1.49 $1.29
826 3/64" Chisel Tip $1.49 $1.29
827 3/64" Pencil Tip $1.59 $1.39




Low Cost De-Soldering System




SL-928 is a reliable and low cost service center and it will assist virtually all electronic repair and rework applications. The desoldering mode is temperature controlled from 410 degrees F to 900 degrees F. The SL-928 is based on the principle of vacuum absorption of the solder from the PC board. Includes 5 extra filters, one extra nozzle and two extra collection cartridges.

Features

Cat No. Product Description Price
SL-928 Low Cost De-Soldering System $279.00
SL-928-GUN Replacement Hand Piece/Heater $39.00
SL-928-FILTER Replacement Solder Filters $.59
SL-928-HOSE Replacement Suction Hose $1.99



QUANTITY PRICING DOES NOT APPLY TO MIXED ITEMS!





To Order,

Please Call Toll Free at (800) 811-5208

Inside the Phoenix-Metro Area Please Call (602) 464-2485



©1995 Circuit Specialists, Inc.